6 Common Fire Code Violations You Can Spot and Quickly Fix
- Fire Alarm Manual pull stations in sprinklered buildings are permitted to have 200 feet of travel distance between. 907.4.2.1 – NFPA 13 and NFPA 13R. Heat detectors are not required when sprinklers are present. 907.4.3.1– NFPA 13 and NFPA 13R. Multiple manual pull stations not required when sprinklers are present in A, B, E, F, M.
- Jan 29, 2014 With some exceptions, the 1991 Standards set the maximum height for controls that can be reached by a side reach at 54 inches above the floor or ground; the 2010 Standards, at section 308.3, lower the maximum height (whether by side or forward approach) to 48 inches.
- With some exceptions, the 1991 Standards set the maximum height for controls that can be reached by a side reach at 54 inches above the floor or ground; the 2010 Standards, at section 308.3, lower the maximum height (whether by side or forward approach) to 48 inches.
- The correct answer will depend on your local codes and ordinances, which may reference national fire or life-safety standards, which reference national fire alarm standards. NFPA 72, the National.
Models F1GT, F1GGT & F1GHT Manual Non-Code Pull Stations Models F1G Manual Non-Code Station Reset To restore an operated station to normal standby condition requires the use of a standard allen-head key. The latch, located just above the nameplate, is turned a quarter turn to the left. This allows the front of the station to swing down.
The most common fire code violations are some of the easiest to identify and remedy. So why do they occur so frequently? The main reason these violations are taking place is simply that people aren’t aware of the fire code requirements. But claiming ignorance won’t prevent a code officer from giving you a hefty fire code violation fine. So here are the 6 common fire code violations you need to look for in your facility and how you can quickly remedy the problem.
1. Fire Extinguishers: Expired Tags and Obstruction
Whether it’s in your facility or somewhere else, if you start noticing fire extinguishers, you’ll see some with expired fire extinguisher inspection tags. In order to ensure all your extinguishers stay up to date on their inspections, you can hire a fire protection company or assign one of your staff members to perform the monthly fire extinguisher inspection. Most jurisdictions will allow any competent person to perform the monthly inspection since the code is very easy to understand and the inspection is simple. Another problem is that the fire extinguisher should be in plain sight and have nothing blocking it. This can be easily fixed by moving the obstruction out of the way.
2. Painted Fire Sprinkler Heads
Only manufacturers can paint fire sprinkler heads. Unfortunately, when painters make their way through a building they’ll forget to cover a few fire sprinkler heads. If a sprayer was used to paint the ceilings then the paint will be splattered on the head. You can identify the issue by performing a simple visual inspection at ground level. But if the ceilings are high you may have to get a closer look. Any fire sprinkler heads that are painted will need to be replaced by a professional fire protection contractor. Here are some tips on how to prevent other common fire sprinkler deficiencies.
3. Fire Alarm Trouble Signals
Unless the fire alarm is beeping or generating false alarms most people won’t know there’s a problem. That’s why it’s important to check your fire alarm panel on a regular basis. The panel will have certain items lite up which will indicate the fire alarm panel signals meaning and the issue. When there’s a problem don’t wait, call a fire alarm company right away.
4. Fire Pumps Not Regularly Tested
Out of sight out of mind. Fire pumps are located on the bottom floor of the building so they’re often forgotten about. A layer of dust on a pump is a good indicator that no one is performing the fire pump monthly churn test. But this neglect can lead to hefty fire pump repair costs that you’ll never forget. Fortunately, in-house personnel can perform this monthly test or you can hire a fire protection company to come to your site monthly. Many fire protection companies offer training and can show your staff how to perform the fire pump churn test. If you decide to have this test done in-house double check with the authority having jurisdiction on their requirements for personnel performing the test.
5. Obstructed Exits
There should be no items impeding the pathway to any exit. The biggest problem isn’t with exits that are used on an everyday basis but with emergency exits. Since they’re used infrequently items will end up stacked up in front of them. In the worst cases, emergency exit doors are chained and locked. In the event of an emergency if people can’t get out you’ll find yourself with a lot more to deal with than a fine. So if you know this is occurring in your building clear the pathway to the emergency exit door and unlock it. Let facility personnel know nothing should impede the exit path.
6. Blocked Fire Alarm Pull Stations
This probably occurs as often if not more so than fire extinguisher obstruction. The most common fire alarm pull station obstruction items are plants, furniture, and displays. If someone can’t clearly spot the fire alarm pull station then there’s a problem and you need to remove the obstruction.
Fire Alarm Pull Station Height
Now that you’re aware of these common fire code violations take a walk around and survey your facility. You have all the information you need to solve the problems. Make it part of your routine to look for these violations on a monthly basis and you won’t have to worry about receiving fines for fire code violations.
Subscribe To Our Newsletter
Join Kinetix’s monthly newsletter and receive expert advice, tips, and the latest industry news to make overseeing fire & life safety easier.
Fire Alarm Manual Pull Station Height Code California
Thank you for your interest in Kinetix Fire!
Categorized in: Education, Fire Alarms, Fire Pumps, Fire Sprinklers, Fire Suppression, General